Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Agility 50
Part:

To start, position the scooter on the stand and simply unscrew the bolts securing the variator cover. Next, unscrew the central nuts of the variator, remove the discs and the drive belt. Now you can open the variator and change the rollers, or replace the contrast spring, or change the drive belt if it is damaged. After this simple and quick disassembly shown in the video, you can replace any part of your transmission. Then reassemble everything in reverse order, ensuring that everything is properly seated.

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Variator on a Kymco Agility 50
How to Replace the Variator on a Kymco Agility 50
Agility 50 This video shows the procedure for disassembling and replacing the variator and rollers, as well as the drive belt, on the Kymco Agility 50 scooter. …
How to Remove the Variator and Rollers from a Kymco Agility 50
How to Remove the Variator and Rollers from a Kymco Agility 50
Agility 50 This guide outlines the main steps to remove and replace the variator and its rollers on the Kymco Agility 50 scooter. First, place your scooter on t…
How to Replace the Rollers of the Kymco Agility 50 Variator
How to Replace the Rollers of the Kymco Agility 50 Variator
Agility 50 In this video, see how to dismantle and replace the rollers of the variator on the Kymco Agility 50cc scooter in simple steps. First, place the scoot…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos