Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. :
  3. Agility 200i
    4. : Replacing the brake light bulb on Kymco Agility 200i

Model: Kymco Agility 200i
Part: Rear light bulb
Replacing the brake light bulb on Kymco Agility 200i

First remove the scooter battery (unfortunately the only access is from here, behind the compartment under the saddle) by unscrewing the fastening bolts of the battery compartment and disconnecting its poles (always starting from the negative). VoilÃ! You can now access the rear brake light bulb. In this model of scooter and for this operation, the problem consists precisely in finding access to the light bulb, as it is not possible to access it from the rear as is usually the case. Once the battery has been removed, simply unscrew the bulb and extract it from its seat, then proceed backwards for reassembly.


Posted on 16 February 2024 by ScegliAuto

How to change the engine oil of Suzuki RM-Z450?

In order to replace the engine oil of the Suzuki RM-Z450 you have to loosen the screws that secure the skid plate positioned in the lower part of the bike; once this has been removed, it will be possible to go and unscrew the oil drain plug located in the part previously covered by the plate. Therefore all the used oil must be collected in a suitably positioned container; when all the oil has run out, the oil filter can be removed and replaced. Then you will have to top up by inserting the new oil from the vent on the crankcase on the left of the bike.

Watch the video!


by ScegliAuto

More videos