Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Warm up the engine (by starting it) for a few minutes so that the oil is warm and fluid. First, unscrew the upper fill hole near the oil filter, and only then the bolt located underneath the bike. These two steps, working with a warm engine and opening both holes immediately, will facilitate the draining of the used lubricant, which you will collect in a container. For this use and model, it is recommended to use synthetic oil 10W-30. Close the drain hole by screwing in the plug (the bolt) and refill the same amount of oil from the upper hole.

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Kymco Xciting 250 R?
How to Change the Engine Oil on the Kymco Xciting 250 R?
Xciting 250 R To replace the engine oil on the Kymco Xciting 250 R, first remove the oil drain plug located at the central bottom of the vehicle. This will allow y…
How to Change the Engine Oil of the Kymco Xciting 250 R?
How to Change the Engine Oil of the Kymco Xciting 250 R?
Xciting 250 R To change the engine oil on the Kymco Xciting 250 R, unscrew the oil drain plug located at the central lower part of the bike. This allows you to col…
How do you replace the transmission oil of the Kymco Xciting 250?
How do you replace the transmission oil of the Kymco Xciting 250?
Xciting 250 R In order to replace the transmission oil of the Kymco Xciting 250, you need to loosen the screws that secure the drain plug of the transmission housi…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos