Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To proceed with the engine oil change on this motorcycle, follow the instructions provided below and refer to the tutorial video. First, you will need a socket spanner and a container for collecting the used oil. Under the engine cover, you will find the oil drain plug; use the socket spanner to unscrew the plug, ensuring the container is placed on the floor to collect the used oil. Wait a few minutes for all the oil to drain out and then re-screw the plug after cleaning the filter. Finally, fill the system with new oil.

Updated on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil on a Kymco Agility 125 scooter?
How to change the engine oil on a Kymco Agility 125 scooter?
Agility 125 .. In this tutorial, you can see how to change the engine oil on a Kymco Agility 125 scooter, a very simple and quick operation to perform.. …
How to Replace the Engine Oil and Oil Filter of the Kymco Agility 125
How to Replace the Engine Oil and Oil Filter of the Kymco Agility 125
Agility 125 Follow these instructions to remove and replace the air filter and change the engine oil of the Kymco Agility 125 scooter. First, place your scooter …
How to Change the Engine Oil on the Kymco Agility 125 Scooter?
How to Change the Engine Oil on the Kymco Agility 125 Scooter?
Agility 125 In this tutorial, you will learn how to change the engine oil on the Kymco Agility 125 scooter, a simple task to perform every 3,000 miles. First, en…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos