Do it yourself
Frequently asked questions about cars and motorcycles

Model: Kymco Super 8 50
Part: Clock

To manually change the time displayed on the dashboard of your Kymco Super 8 50, follow the steps outlined in this guide. First, insert the key and turn it to power on the dashboard of your bike. Next, press and hold both the "Mode" button and the "Adj" button for a few seconds. Release them as soon as the time starts to flash, and use the "Adj" button to change the hour digit. After that, press "Mode" and repeat the same procedure for the minutes. Finally, switch off and then on the dashboard to save the changes.

Updated on 10 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Super 8 50 Replacing the spark plug on the Kymco Super 8 scooter is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, w…
Super 8 50 This guide shows how to replace the gear oil of the Kymco Super 8 50cc scooter in simple and quick steps. First, place the scooter on its centre stan…
Super 8 50 How to change the engine oil on the Kymco Super 8 50 scooter? Follow these steps for the oil replacement. Lift the scooter on a central or mechanic s…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos