Do it yourself
Frequently asked questions about cars and motorcycles
Replacing the spark plug on the Kymco Super 8 scooter is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, wait for the engine to cool down, then open the seat and unscrew the bolts around the perimeter with a 10 mm socket spanner. Next, remove the internal compartment, disconnect the spark plug connector, and unscrew it using the appropriate 21 mm spanner. If it is stuck, you can apply some penetrating spray. Finally, tighten the replacement, reconnect the cable, and reassemble everything by following the reverse procedure.

Updated on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Super 8 50 How to change the engine oil on the Kymco Super 8 50 scooter? Follow these steps for the oil replacement. Lift the scooter on a central or mechanic s…
Super 8 50 This guide shows how to replace the gear oil of the Kymco Super 8 50cc scooter in simple and quick steps. First, place the scooter on its centre stan…
Super 8 50 To manually change the time displayed on the dashboard of your Kymco Super 8 50, follow the steps outlined in this guide. First, insert the key and t…

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos