Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Super 8 50

Kymco Super 8 50 - Video guides

Kymco Super 8 50
How to Replace the Spark Plug on the Kymco Super 8 Scooter
Replacing the spark plug on the Kymco Super 8 scooter is an extremely simple and quick operation; let's see how to proceed in this tutorial. First, wait for …Read all…
Posted on 28 July 2026 by ScegliAuto
Kymco Super 8 50
How to Set the Time on the Kymco Super 8 50
To manually change the time displayed on the dashboard of your Kymco Super 8 50, follow the steps outlined in this guide. First, insert the key and turn it to …Read all…
Posted on 15 August 2026 by ScegliAuto
Kymco Super 8 50
How to Replace the Gear Oil of the Kymco Super 8 50
This guide shows how to replace the gear oil of the Kymco Super 8 50cc scooter in simple and quick steps. First, place the scooter on its centre stand and …Read all…
Posted on 14 July 2026 by ScegliAuto
Kymco Super 8 50
Kymco Super 8 Battery Replacement
Using a small flat screwdriver, lift and remove the small part of the footrest near the seat. Unscrew the bolt for the negative terminal (always the negative …Read all…
Posted on 8 June 2026 by ScegliAuto
Kymco Super 8 50
Change Engine Oil on Kymco Super 8 50 Scooter
How to change the engine oil on the Kymco Super 8 50 scooter? Follow these steps for the oil replacement. Lift the scooter on a central or mechanic stand, then …Read all…
Posted on 28 April 2026 by ScegliAuto

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos