Do it yourself
Frequently asked questions about cars and motorcycles
To replace the front brake pads on a Kymco Like 150i, loosen the bolts securing the caliper to the brake disc. Once the bolts are loosened, you can slide the caliper off the disc to remove the old pads from their housing. At this point, insert the new pads into the caliper, which should then be positioned back onto the disc and secured with the appropriate bolts. After securing, check that the brake functions correctly.

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Like 150i To replace the rear brake pads on the Kymco Like 150i, loosen the screws that secure the brake caliper to the corresponding disc. Once these securing…
Like 150i Before you begin, position your Kymco Like 150i on its centre stand. Start by removing the seat and under-seat panel by unscrewing the fixing bolts. …
Like 150i Before you begin, place your Kymco Like 150i on its centre stand. Start by opening the under-seat compartment of the scooter, then remove the under-s…

How to replace the engine oil in the Ducati Monster S2R 1000?

In this tutorial we can see how to replace the motor oil in the Ducati Monster S2R 1000, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain plug and unscrew it using a hex key. Next, unscrew the cap of the secondary filter, remove it and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos