Do it yourself
Frequently asked questions about cars and motorcycles
To replace the rear brake pads on the Kymco Like 150i, loosen the screws that secure the brake caliper to the corresponding disc. Once these securing screws are loosened, you can completely detach the caliper from its disc, allowing you to remove the pads located inside the caliper. After the old pads have been removed, insert the new replacement parts, reposition the caliper onto the corresponding disc; after installation, check that the rear brake functions correctly.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Like 150i Replacing the rear brake pads on a Kymco Like 150i is straightforward. First, disconnect the brake cable and remove the two bolts securing the calipe…
Like 150i To replace the front brake pads on a Kymco Like 150i, loosen the bolts securing the caliper to the brake disc. Once the bolts are loosened, you can s…
Like 150i Unscrew the two bolts that secure the brake caliper to the disc. At this point, remove the covers from the two small bolts related to the pads. You a…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos