Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Lancia Lybra

Model: Lancia Lybra MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Service warning light

Video tutorial

This tutorial explains the procedure to follow to reset the service light on a Lancia Lybra. Get into the vehicle and insert the key, turn on the instrument panel without starting the engine.

Press and hold the reset button on the dashboard or near the speedometer until the maintenance message appears on the display. With the button still pressed, watch the light flash and then turn off, indicating that the reset has been successfully completed.

Release the button, turn off the instrument panel, and restart the engine to verify that the service light is indeed off.


Posted on 16 August 2026 by ScegliAuto


Related tutorials

Where are the fuses located in the Lancia Lybra?
Where are the fuses located in the Lancia Lybra?
Lancia Lybra (1998-2005 / MK 1) The fuses of the Lancia Lybra are contained within two fuse boxes installed in the vehicle: in this model, you can find two boxes. The first is locat…
How to Replace the Number Plate Bulb on a Lancia Lybra
How to Replace the Number Plate Bulb on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) To replace the number plate bulb on a Lancia Lybra, loosen the two screws located at the top and bottom of the light unit, positioned on the left sid…
What is the fuse diagram for the Lancia Lybra?
What is the fuse diagram for the Lancia Lybra?
Lancia Lybra (1998-2005 / MK 1) In this video, you can see where the fuse boxes are located in the Lancia Lybra and their respective diagrams, to consult in case you need to check t…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos