Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Climate Control Switches on a Lancia Lybra

Model: Lancia Lybra MK 1 - Years 1998-2005
Part: A/C controls

Before you begin, sit in the driver's seat of your Lancia Lybra. Start by opening the ashtray located below the controls, then unscrew and remove the Torx screws inside, and finally, remove the ashtray itself. Next, unclip and remove the central cup holders. At this point, unscrew and remove all the Torx screws securing the climate control switches, then extract the switches from their housing, and finally disconnect the rear plugs. Once you have completed this last step, you will have successfully dismantled the components.

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Door Speaker on a Lancia Lybra
How to Replace the Front Door Speaker on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) Before starting, open the front door of your Lancia Lybra. Begin by prising off the speaker cover using a flathead screwdriver. Next, unscrew and rem…
How to Remove the Front Door Panel on a Lancia Lybra
How to Remove the Front Door Panel on a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) In today's video tutorial, learn how to remove the front door panel of a Lancia Lybra in simple and quick steps. First, open the front door and start…
How to Remove the Door Panel of a Lancia Lybra
How to Remove the Door Panel of a Lancia Lybra
Lancia Lybra (1998-2005 / MK 1) Before you begin, open the front door of your Lancia Lybra. Start by unclipping and removing the window switch panel, then disconnect the correspondi…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos