Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Speakers in the Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Speaker

In this video tutorial, you can see how to replace the rear speakers in the Lancia Ypsilon. First, purchase a new speaker kit. Now, lift the rear seat and you will see slots with hooks; simply lift the hooks by moving them outward and then inward. At this point, you can remove the seat from its housing, giving you more space to work. Now, remove the panel where there are 5 red levers that need to be inserted into the yellow housings. At this point, you have access to the speaker that you need to remove and replace with the new speaker kit.

Updated on 21 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radio from a Lancia Ypsilon
How to Remove the Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you can begin, sit in the driver's seat of your Lancia Ypsilon. Start by inserting the appropriate extraction keys into the four holes on the …
How to Replace the Rear Bulb in a Lancia Ypsilon
How to Replace the Rear Bulb in a Lancia Ypsilon
Lancia Ypsilon (1996-2003 / Y1, Ypsilon 1, MK 1, 840) In today's video, see how to replace the rear bulbs in the first series Lancia Ypsilon. First, obtain the bulbs you need to replace. You can find the…
How to Remove the Car Radio from a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Before you start, sit in the front passenger seat of your Lancia Ypsilon. Begin by inserting the extraction keys into the holes located on the front …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos