Do it yourself
| ||||
|
Lancia Flavia - Video tutorial
Model: Lancia Flavia
MK 2
- Years 2012-2013 To reset the service warning light on the car, proceed as follows: access the driver's seat, turn on the ignition and do not start the engine, wait for the system to load completely. To carry out the reset it is necessary to use the accelerator pedal which must be pressed three times one after the other to the bottom within a maximum time of ten seconds and then release the pedal completely to then turn off the ignition. In this way the reset procedure is completed. It is possible to carry out the verification test by turning the ignition on again and checking that the warning light is effectively reset.
Posted on 27 December 2022 by ScegliAuto
Other guides that may interest you
|
How to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |