Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Defender
    4. : Starter motor

Land Rover Defender - Starter motor

Land Rover Defender (1990-2016 / MK 6)
How to replace the starter motor on a Land Rover Defender
Before starting, we will have to go to open the front hood of our Land Rover Defender. So let's start by disconnecting the battery poles, unscrewing the …read all…
Posted on 26 February 2024 by ScegliAuto
Car stereo (1) Anti roll bar (1) Battery (3) Bodywork (1) Key (1) -board computer (1) Checks and maintenance (3) Differential (1) Diesel filter (3) Dashboard light (1) Starter motor (1) Door panel (1) Windshield (1) Gear Shift Knob (1) Pump (2) Fuel pump (2) Fuse box (3) Seat (2) Windscreen wipers (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos