Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Land Rover
  4. :
  5. Defender
  6. : Fuel pump

Land Rover Defender - Fuel pump

Fuel Pump Land Rover Defender (1990-2016 / mk 6)

Land Rover Defender (1990-2016 / MK 6)
How to Replace the Diesel Fuel Pump on a Land Rover Defender TD5

This guide shows how to replace the diesel fuel pump on a Land Rover Defender TD5. The fuel pump is located in the rear compartment of the vehicle, but access …Read all…
Posted on 10 June 2026 by ScegliAuto
Land Rover Defender (1983-1990 / MK 5)
Replacing the Fuel Pump on a Land Rover Defender TD5

In today's tutorial video, you will see the main instructions on how to remove and replace the fuel pump or the float pump on a Land Rover Defender TD5. First, …Read all…
Posted on 15 May 2026 by ScegliAuto

Fuel Pump Land Rover Defender (1983-1990 / mk 5)

Land Rover Defender (1990-2016 / MK 6)
How to Replace the Diesel Fuel Pump on a Land Rover Defender TD5

This guide shows how to replace the diesel fuel pump on a Land Rover Defender TD5. The fuel pump is located in the rear compartment of the vehicle, but access …Read all…
Posted on 10 June 2026 by ScegliAuto
Land Rover Defender (1983-1990 / MK 5)
Replacing the Fuel Pump on a Land Rover Defender TD5

In today's tutorial video, you will see the main instructions on how to remove and replace the fuel pump or the float pump on a Land Rover Defender TD5. First, …Read all…
Posted on 15 May 2026 by ScegliAuto

Car stereo (1) Anti-roll bar (1) Battery (5) Body (3) Snow chains (1) Key (5) Onboard computer (1) Checks and maintenance (2) Differential (1) Cabin air filter (1) Diesel fuel filter (3) Instrument panel light (1) Starter motor (1) Door trim panel (1) Windshield (1) Tires (1) Shift knob (2) Pump (2) Fuel pump (2) Fuse box (7) Seat (2) Warning light – error code (1) Service warning light (6) Windshield wipers (1) Steering wheel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos