Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Fuel Pump on a Land Rover Defender TD5

Model: Land Rover Defender MK 5 - Years: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990
Part: Fuel pump

See other generations:
Video tutorial

In today's tutorial video, you will see the main instructions on how to remove and replace the fuel pump or the float pump on a Land Rover Defender TD5. First, remove the rear bumper and take off the metal shield located under the fuel tank; then lower the tank to access the fuel pump, as shown in the video.

At this point, disconnect the fuel line and unscrew the retaining ring to extract the pump; simply replace it with the new one and reassemble everything, following the video to the end!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

Land Rover Defender (1990-2016 / MK 6) This guide shows how to replace the diesel fuel pump on a Land Rover Defender TD5. The fuel pump is located in the rear compartment of the vehicle, b…
…
Land Rover Defender (1983-1990 / MK 5) In this guide, you will find the main instructions for installing the seat belt anchor system on the Land Rover Defender TD5, first series, in simple…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos