Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove Rear Bumper on Range Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Rear bumper

How to remove the rear bumper of the Range Rover Evoque? Lift the trunk and start disassembling the various parts. Remove the securing screws located at the back of the taillights (after removing the plastic covers): take them out after disconnecting the power connectors. Remove the screws located at the bottom of the bumper, then remove the screws on the sides of the wheel well liners. Detach the plastic rivets around the bumper. Once the bumper is free from any screws or pins, grab it with your hands and pull it away from the body: disconnect the electrical connectors behind it.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Bumper of the Range Rover Evoque Mk1
How to Remove the Rear Bumper of the Range Rover Evoque Mk1
Land Rover Evoque (2011-2018 / L538, MK 1) This guide shows how to remove the rear bumper of the Range Rover Evoque Mk1. To perform this operation, lift the rear of the vehicle. From the rear …
How to replace the rear headlight bulbs of the Land Rover Range Rover Evoque
How to replace the rear headlight bulbs of the Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today we will discover the process of disassembling and replacing the bulbs of the rear light of the Land Rover Range Rover Evoque, in simple steps. …
How to reset the service indicator on the Range Rover Evoque
How to reset the service indicator on the Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this new mini guide, we will help you complete the procedure that allows you to manually reset the service light on the instrument panel of your f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos