Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : How to remove the rear bumper of the Range Rover Evoque Mk1

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: Rear bumper
Operation: How to remove the rear bumper of the Range Rover Evoque Mk1

The guide shows how to remove the rear bumper of the Range Rover Evoque Mk1. To carry out this operation, the rear part of the vehicle must be raised. From the rear wheel arches it is necessary to remove the fixing bolts and, with plastic lifters, remove the finishing plastic. Once the rear door is open, remove the four fixing pins on the lower edge of the compartment. Unscrew the fixing screws and remove the lights. Unscrew the bolts located in the lower part of the bumper. At this point it is possible to detach the fixing clips of the bumper and finally it is possible to remove it.


Posted on 12 March 2024 by ScegliAuto



Remove Range Rover Evoque rear bumper
Land Rover Evoque (2011-2018 / MK 1, L538) How to remove the rear bumper of the Range Rover Evoque? We lift the tailgate and begin the disassembly of the various pieces. Unscrew the fastening
Removing the rear door panel Range Rover Evoque
Land Rover Evoque (2011-2018 / MK 1, L538) Let's see in this video how to remove the rear door panel of a Range Rover Evoque, following these simple steps. First we open the rear door and with
How to replace the timing belt on Range Rover Evoque
Land Rover Evoque (2011-2018 / MK 1, L538) To replace the service belt on the Land Rover Range Rover Evoque, the vehicle must first be lifted onto the deck. Now let's remove the right front wh

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos