Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on the Land Rover Range Rover

Model: Land Rover Range Rover L322, MK 3 - Years 2002-2012
Part: Fuel pump

In this guide, you will find the main instructions on how to remove and replace the fuel pump on the Land Rover Range Rover. First, open the rear doors of the vehicle and lower the seatbacks, then remove the seats. Now, remove the carpet covering to access the top of the gasoline tank, as shown in the video. At this point, disconnect the fuel pump supply line and also disconnect its electrical connector. Unscrew the retaining ring of the submerged pump to remove it from the tank, replacing it if necessary, and do the same for the other fuel pump.

Posted on 6 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Pump on the Land Rover Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) In this video, see the main instructions to remove and replace the low-pressure fuel pump on the Land Rover Range Rover Sport. To replace the fuel pu…
How to Replace the Fuel Pump on a Range Rover
How to Replace the Fuel Pump on a Range Rover
Land Rover Range Rover (1994-2002 / MK 2) Want to remove the fuel pump from a Range Rover? The fuel pump is located in the vehicle's fuel tank. First, remove the carpet from inside the trunk …
How to Replace the Battery in a Land Rover Range Rover?
How to Replace the Battery in a Land Rover Range Rover?
Land Rover Range Rover (2002-2012 / L322, MK 3) To replace the battery in a Land Rover Range Rover, lift the key to pry inside its housing: this will allow you to open the fob and access the compon…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos