Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Range Rover

Model: Land Rover Range Rover MK 2 - Years: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Fuel pump

See other generations:
Video tutorial

Want to remove the fuel pump from a Range Rover? The fuel pump is located in the vehicle's fuel tank. First, remove the carpet from inside the trunk to access the fuel pump cover.

Disconnect the battery cables. Next, use a socket wrench to remove the screws securing the metal cover (if present), then take it off its seat.

Cover the perimeter with absorbent paper to catch any fluid leaks. Disconnect the power connectors and the fuel return lines.

Finally, extract the fuel pump from its seat along with any attached components. Install a new replacement part.


Updated on 2 April 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on the Land Rover Range Rover
How to Replace the Fuel Pump on the Land Rover Range Rover
Land Rover Range Rover (2002-2012 / L322, MK 3) In this guide, you will find the main instructions on how to remove and replace the fuel pump on the Land Rover Range Rover. First, open the rear doo…
Replacing the Fuel Pump on the Land Rover Range Rover Sport
Land Rover Range Rover (2012-2021 / MK 2) In this video, see the main instructions to remove and replace the low-pressure fuel pump on the Land Rover Range Rover Sport. To replace the fuel pu…
Replacing the Fuel Filter on a Land Rover Range Rover Sport
Replacing the Fuel Filter on a Land Rover Range Rover Sport
Land Rover Range Rover (2002-2012 / L322, MK 3) In this guide, we will see how to remove and replace the fuel filter on a Land Rover Range Rover Sport by following these simple steps. First, lift t…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos