Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Diesel Fuel Pump on a Land Rover Defender TD5

Model: Land Rover Defender MK 6 - Years 1990-2016
Part: Fuel pump

This guide shows how to replace the diesel fuel pump on a Land Rover Defender TD5. The fuel pump is located in the rear compartment of the vehicle, but access is not possible from above as the floor does not have an access port. The simplest operation is to cut an opening in the floor and install an access hatch. At this point, disconnect the diesel fuel lines and the power connector. To extract the pump body, unscrew the retaining ring of the unit. Reinstalling the fuel pump is done in the same way as disassembly.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Land Rover Defender (1983-1990 / MK 5) In today's tutorial video, you will see the main instructions on how to remove and replace the fuel pump or the float pump on a Land Rover Defender T…
Land Rover Defender (1983-1990 / MK 5) In this guide, you will find the main instructions for installing the seat belt anchor system on the Land Rover Defender TD5, first series, in simple…
Land Rover Defender (1990-2016 / MK 6) If you want to locate the fuse box in your Land Rover Defender (2007-2011) on your own, just carefully read the following guide and put into practice…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos