Do it yourself
Frequently asked questions about cars and motorcycles

Land Rover Defender - Pump

Land Rover Defender (1990-2016 / MK 6)
How to maintain and clean the fuel pump of the Land Rover Defender

To access the pump, it is normal for a hole to be drilled in the floor of the Defender. Virtually everyone has it, because otherwise we would have to dismantle …read all…
Posted on 27 August 2022 by ScegliAuto
Land Rover Defender (1983-1990 / MK 5)
Land Rover Defender Water Pump Replacement Guide

In today's video we will see the instructions necessary for the disassembly and replacement of the Land Rover Defender water pump. First of all we open the …read all…
Posted on 26 April 2024 by ScegliAuto

Car stereo (1) Anti roll bar (1) Battery (3) Bodywork (1) Key (1) -board computer (1) Checks and maintenance (3) Differential (1) Diesel filter (3) Dashboard light (1) Starter motor (1) Door panel (1) Windshield (1) Gear Shift Knob (1) Pump (2) Fuel pump (2) Fuse box (3) Seat (2) Windscreen wipers (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos