Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tire Pressure Light on a Land Rover Evoque?

Model: Land Rover Evoque L538, MK 1 - Years 2011-2018
Part: Tire pressure warning light

You cannot reset the tire pressure light on the Land Rover Evoque through the onboard computer settings; it must be done using a diagnostic tool. Connect the tool to the OBD port located on the dashboard just below the steering column. Once the device is connected, select the specific model and version. Then, choose the option to reset the tire light, and you can disconnect the device, ensuring the reset was successful.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
How to Reset the Tire Pressure Light on the Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Today, let's go through the steps to reset the tire pressure light on the Land Rover Range Rover Evoque. First, get in the vehicle and turn on the ig…
Reset the Tire Pressure Light on the Land Rover Evoque
Reset the Tire Pressure Light on the Land Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) Follow these instructions to reset the tire pressure monitoring system (TPMS) light on your Land Rover Evoque. Before performing the reset, ensure al…
How to Reset the Tire Pressure Light on a Land Rover Evoque?
How to Reset the Tire Pressure Light on a Land Rover Evoque?
Land Rover Evoque (2011-2018 / L538, MK 1) To reset the tire pressure light on a Land Rover Evoque, first inflate all the tires to the recommended pressure: this value is found on the sticker …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos