Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Discovery
    4. : How to unlock Land Rover Discovery Sport automatic gearbox

Land Rover Discovery - Video tutorial

Model: Land Rover Discovery L462, MK 5, Discovery 5 - Years 2017-2023
Part: Gearbox
Operation: How to unlock Land Rover Discovery Sport automatic gearbox

The guide shows how to perform the Land Rover Sport automatic transmission emergency release. After securing the vehicle, from the right side of the engine compartment, disconnect the air manifold and remove the engine air filter box; to carry out this operation it is necessary to detach the air sleeve and the mass flow meter connector. At the bottom of the created compartment you will see the gear release lever. To release the locking system it is necessary to pull the lever towards the left light and lock it in position with a small screwdriver or with a pin. At this point the machine is in neutral and it is possible to move it.


Posted on 31 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Discovery 2017-2023 - Are there any issues with the automatic transmission of the Land Rover Discovery Sport? Read Answer
    • Discovery 2010-2016 - Why does the automatic gearbox selector lock in the Land Rover Discovery Sport? Read Answer
    • Discovery 2010-2016 - What problems could the automatic transmission of the Land Rover Discovery present? Read Answer
    • Discovery 2017-2023 - What problems does the automatic transmission of the Land Rover Discovery Sport have? Read Answer
    • Discovery 2017-2023 - How can I unlock the automatic transmission of my Land Rover Discovery Sport? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos