Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Shift Knob on a Land Rover Discovery?

Model: Land Rover Discovery LR3, L319, Discovery 3, MK 3 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Transmission

See other generations:
Video tutorial

To replace the gear shift knob on a Land Rover Discovery, lift the lower part of the boot, disengaging its securing clips to remove it from the center console. Next, grasp the actual knob and pull it to remove it from the gear lever.

Once the old knob and the boot have been removed, you can insert the new knob, securing it onto the gear lever and inserting the securing clips at the bottom of the boot into their designated slots in the center console.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

Where to Find the OBD Port of the 2016 Land Rover Discovery
Land Rover Discovery (2010-2016 / MK 4, LR4, Discovery 4) Finding the OBD port in your 2016 Land Rover Discovery is very simple, and with the following guide, it will literally take you just a few seconds. F…
How to Replace the Driveshaft on a Land Rover Discovery?
How to Replace the Driveshaft on a Land Rover Discovery?
Land Rover Discovery (1998-2004 / L318, Discovery 2, MK 2) To replace the driveshaft on a Land Rover Discovery, lift the vehicle using a jack or a lift to access the underside. Here, you will find the drivesh…
How to Reset the "Service" Light on a Land Rover Discovery
How to Reset the "Service" Light on a Land Rover Discovery
Land Rover Discovery (2017-2024 / L462, MK 5, Discovery 5) Before starting, ensure that the driver door and the hood are open. Activate the instrument cluster of your Land Rover Discovery without starting the…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos