Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Evoque
    4. : How to replace the EGR valve on a Land Rover Evoque.

Land Rover Evoque - Video tutorial

Model: Land Rover Evoque MK 1, L538 - Years 2011-2018
Part: EGR valve
Operation: How to replace the EGR valve on a Land Rover Evoque.

In this video, we see how to replace the EGR valve on a Land Rover Evoque. To access the valve, we need to remove the oil separator from the common rail, which we need to remove. To do this, we just need to remove the fuel pipes and disconnect the pipes from the oil separator. This way, we will have removed the common rail. We then see in the video the camshaft position sensor, when the oil separator has been removed from its seat, and we see this component well in the video. We then see the EGR valve removed from its seat, along with the cooling group, and the place from where it was removed. Finally, we see the two new and cleaned components, ready to be put back in their place.


Posted on 23 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Evoque 2018-2025 - How do you replace the EGR valve of the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - What are the problems with the EGR valve of the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - Where is the EGR valve located, in the Range Rover Evoque? Read Answer
    • Evoque 2011-2018 - What are the problems with the Range Rover Evoque EGR valve? Read Answer
    • Evoque 2011-2018 - Where is the EGR valve located in the Range Rover Evoque? Read Answer
    • Evoque 2018-2025 - Where is the Range Rover Evoque EGR valve located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos