Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve from the Land Rover Range Rover 5.0 V8

Model: Land Rover Range Rover MK 2 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: EGR valve

See other generations:
Video tutorial

Today's main instructions will guide you through the disassembly and replacement of the EGR valve on the Land Rover Range Rover 5.0 V8. First, open the hood of the vehicle and locate the EGR valve attached to the oil cooler; disconnect the various hoses and the EGR valve manifold, then disconnect the electrical connector of the sensor.

At this point, remove the mounting screws to take out the EGR valve, clean it, or replace it if necessary; reinstall the EGR valve, making all connections, and follow the video tutorial to the end!


Posted on 1 May 2026 by ScegliAuto


Related tutorials

Removing EGR Valve on Land Rover Range Rover
Land Rover Range Rover (2002-2012 / L322, MK 3) In this video tutorial, you will learn how to remove the EGR valve on a Land Rover Range Rover. First, open and lift the hood. Remove the screws secu…
Remove the EGR Valve on Land Rover
Remove the EGR Valve on Land Rover
Land Rover Range Rover (2002-2012 / L322, MK 3) Is the EGR valve due for replacement? Let's see how to remove it on a Land Rover Range Rover Sport. Lift the hood and secure it, then remove the engi…
How to Install the Tire Pressure Sensor on the Land Rover Range Rover
How to Install the Tire Pressure Sensor on the Land Rover Range Rover
Land Rover Range Rover (2012-2021 / MK 2) Today, you will see in this brief guide the instructions to install or replace the Tire Pressure Monitoring System (TPMS) sensor on the Land Rover Ra…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos