Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : Disassembly of the EGR valve Land Rover Range Rover

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover L322, MK 3 - Years 2002-2012
Part: EGR valve
Operation: Disassembly of the EGR valve Land Rover Range Rover

In this video tutorial we will see how to disassemble the EGR valve on a Land Rover Range Rover. First of all we open and lift the bonnet and remove the fixing screws of the plastic engine cover with a socket wrench; then we access the EGR valve, where we will unscrew the screws of the two clamps in order to remove the rubber sleeve and the exhaust gas pipe. At this point we are going to unscrew the fixing screws of our valve and remove it, as shown in the video. We just have to clean it with degreasers or replace it with the new one!


Posted on 7 February 2024 by ScegliAuto

This video is currently unavailable

    Frequently Asked Questions

    • Range Rover 2012-2021 - How much does it cost to replace the EGR valve on the Range Rover Sport? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos