Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Range Rover
    4. : Remove the EGR valve on Land Rover

Land Rover Range Rover - Video tutorial

Model: Land Rover Range Rover L322, MK 3 - Years 2002-2012
Part: EGR valve
Operation: Remove the EGR valve on Land Rover

Does the EGR valve need to be replaced? Let's see how to disassemble it on a Land Rover Range Rover Sport. We lift the engine hood and put it in safety, then, we remove the soundproof panel of the engine, with a screwdriver we unscrew the locking pins of the ventilation pipe. We disassemble the locking pins of the EGR valve as in the video. Once the piece has been removed from its seat, we can extract it from the engine compartment. Unscrew the screws on the valve with a screwdriver if we need to clean it. Let's start cleaning the valve with the help of a product suitable for cleaning mechanical parts, we use a brush to make operations easier. We mount the new or cleaned valve, screw in the clamping screws. We mount the air tube and the engine cover panel.


Posted on 1 December 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Range Rover 2012-2021 - How much does it cost to replace the EGR valve on the Range Rover Sport? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos