Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. LEVC
  4. :
  5. Vn5
  6. : How to use the access ramp for the disabled on the Levc Vn5

LEVC Vn5 - Video tutorial

Model: LEVC Vn5 MK 1 - Years 2020-2024
Operation: How to use the access ramp for the disabled on the Levc Vn5

Let's see below how to manage and use the ascent ramp for wheelchairs for the disabled in the prepared car version: first of all, open the rear door and lift the aluminum sheet at the end of the loading surface, under it there is a lever that must be pulled towards you, at this point it will be possible to pull the platform towards you and with the handle which is located about halfway along the ramp it will be possible to extract it completely and place it on the ground, after which it is possible to overturn the profiles lateral fall arresters and then lower the aluminum foil of the loading edge again.


Posted on 29 November 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos