Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lexus
    3. :
  3. Lexus Nx
    4. : Battery

Lexus NX - Battery

Lexus NX (2014-2021 / MK 1)
How do you replace the battery in the Lexus NX 300H?
To be able to replace the battery of the Lexus NX 300H you have to go and open the tailgate, so that you go and remove the carpet which serves as flooring to …read all…
Posted on 20 December 2022 by ScegliAuto
Lexus NX (2014-2021 / MK 1)
Lexus Nx 300 key battery replacement
To replace the battery of the Lexus Nx 300 model key proceed as follows: take a pointed object or proceed directly with your fingernail to pry in the center …read all…
Posted on 15 October 2022 by ScegliAuto
Lexus NX (2014-2021 / MK 1)
How to replace the Lexus NX battery
In this video tutorial we will see how to disassemble and replace the Lexus NX battery, following the instructions below. First of all we open the bonnet of …read all…
Posted on 10 August 2022 by ScegliAuto
Lexus NX (2014-2021 / MK 1)
How to replace the Lexus NX 300 key battery
Today we will see, in this video tutorial, how to remove and replace the remote control battery of the Lexus NX 300 electronic key, following these simple …read all…
Posted on 16 March 2024 by ScegliAuto
Battery (4) Key (5) Checks and maintenance (6) Dashboard (1) Accessory Kit (1) Engine oil (1) Tires (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos