Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lexus
    3. :
  3. NX
    4. : How to replace the Lexus NX battery

Lexus NX - Video tutorial

Model: Lexus NX MK 1 - Years 2014-2021
Part: Battery
Operation: How to replace the Lexus NX battery

In this video tutorial we will see how to disassemble and replace the Lexus NX battery, following the instructions below. First of all we open the bonnet of our car and start unscrewing the two fixing nuts of the central bracket of the battery, in order to remove it; after which we disconnect both terminals (positive and negative pole), in order to remove it, as shown in the video. At this point we are going to install the new battery, of the right type and having the same amperage; finally make the electrical connection and fix the central bracket correctly!


Posted on 10 August 2022 by ScegliAuto

This video is currently unavailable

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos