Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the 12Volt battery in the Lexus NX300

Model: Lexus NX MK 2, Az20 - Years 2021-2026
Part: Battery

We can see in this video how to change the 12-volt battery of the Lexus NX300: first of all, we need to know that the battery is not located in the front hood, but in the trunk compartment; we then remove the cover of the compartment and the luggage cover. On the left side, we find a plastic cover, which we will remove using four clips; we also remove the spare wheel cover and then remove the bolts that hold the safety bracket that goes over the battery. Now we remove the negative terminal - the black one - and then move on to the positive red one, then we remove the small vent tube located on the side of the negative terminal. Now we can remove the battery and install the new one by proceeding in reverse order, starting from the vent tube; positive terminal, then negative terminal, fixing bracket, wheel cover, battery cover, compartment cover, and luggage cover.

Posted on 12 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you check the tire pressure on the Lexus NX300?
How do you check the tire pressure on the Lexus NX300?
Lexus NX (2014-2021 / MK 1) In this video we see how to check the tire pressure on the Lexus NX300: we will use the directional buttons located on the right side of the steering…
How to reset the tire pressure light on the Lexus NX300?
How to reset the tire pressure light on the Lexus NX300?
Lexus NX (2014-2021 / MK 1) In this tutorial we can see how to reset the tire pressure light in the Lexus NX300, an extremely simple and quick operation. Before proceeding, we m…
How to access and start the Lexus NX300 with a flat remote
How to access and start the Lexus NX300 with a flat remote
Lexus NX (2021-2026 / MK 2, Az20) In this video, learn how to open and start a Lexus NX300 in an emergency with a flat remote. If the remote battery is dead and you are in a location …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos