Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre warning light on the Lexus NX300?

Model: Lexus NX MK 1 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial, you will see how to reset the tyre warning light on the Lexus NX300, a very simple and quick operation. Before proceeding, ensure that the correct pressure for each tyre has been restored according to the instructions in the manual.

Start by entering the cabin, then turn on the ignition. Using the directional buttons on the right side of the steering wheel, navigate to the settings screen.

Enter "Vehicle settings", then "TPMS", and wait for the reset to complete as indicated on the display. Finally, restart the vehicle.


Updated on 4 October 2026 by ScegliAuto


Related tutorials

How to check the tyre pressure on the Lexus NX300
How to check the tyre pressure on the Lexus NX300
Lexus NX (2014-2021 / MK 1) In this video, you will learn how to check the tyre pressure on the Lexus NX300: use the directional buttons located on the right side of the steerin…
How to replace the 12Volt battery in the Lexus NX300
How to replace the 12Volt battery in the Lexus NX300
Lexus NX (2021-2026 / Az20, MK 2) We can see in this video how to change the 12-volt battery of the Lexus NX300: first of all, we need to know that the battery is not located in the f…
How to Install Side Mouldings on a Lexus NX300
How to Install Side Mouldings on a Lexus NX300
Lexus NX (2014-2021 / MK 1) To install the side mouldings on the Lexus NX300, you will need three things: alcohol or another suitable cleaner, a clean cloth, and any type of adh…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos