Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lexus
    3. :
  3. Rx
    4. : Accessory Kit

Lexus RX - Accessory Kit

Lexus RX (2003-2008 / MK 2, Xu30)
LED interior lighting installation
Replacing the original incandescent bulbs with those of the LED type will give the car a much more attractive appearance; many manufacturers already sell …read all…
Posted on 22 August 2023 by ScegliAuto
Lexus RX (2003-2008 / MK 2, Xu30)
Hands-free kit installation with bluetooth
In order to install the hands-free kit with bluetooth extension it is first necessary to remove the original car radio and other elements of the internal …read all…
Posted on 31 July 2023 by ScegliAuto
Lexus RX (2003-2008 / MK 2, Xu30)
Aux input adapter installation
To be able to install the adapter of an Aux input to the original car radio it is first necessary to remove the car radio itself. Start by unhooking the trim …read all…
Posted on 26 July 2023 by ScegliAuto
Shock absorbers (1) Car stereo (2) Battery (2) Spark plugs (1) Key (2) V-belt (1) -board computer (1) Checks and maintenance (5) Air filter (1) Cabin air filter (4) Accessory Kit (3) Brake pads (1) Tires (4) Instrument cluster (3) Fuse box (3) Thermostat (1) Central tunnel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos