Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure light on the Lexus LS?

Model: Lexus LS MK 4 - Years 2007-2017
Part:

In order to reset the tire pressure warning light on the Lexus LS, you need to inflate the tires to the recommended pressure value: this value will be indicated on the sticker attached to the driver's side door pillar. Once all the tires have been brought to this pressure value, you can go inside the cabin and turn on the instrument panel: then you can locate the SET button located just below the steering column. By holding it down, you will notice that the warning light disappears from the instrument panel.

Posted on 13 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Lexus LS
How to reset the tire pressure warning light on the Lexus LS
Lexus LS (2007-2017 / MK 4) Today's procedure will show us how to reset the tire pressure warning on the Lexus LS; before resetting the TPMS sensors, it is necessary for all fou…
How to reset the tire pressure warning on the Lexus LS
How to reset the tire pressure warning on the Lexus LS
Lexus LS (2007-2017 / MK 4) These short and simple steps will show us how to reset the tire pressure warning on the Lexus LS; before performing the reset, it is necessary that a…
How to Reset the Tyre Warning Light on the Lexus LS 430?
How to Reset the Tyre Warning Light on the Lexus LS 430?
Lexus LS (2007-2017 / MK 4) In this tutorial, you will see how to reset the tyre warning light on the Lexus LS 430, a very simple and quick operation to perform only after resto…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos