Do it yourself
| ||||
|
Lexus RX - Video tutorial
Model: Lexus RX
MK 1, Xu10
- Years 1997-2003 Do we remove the rear shock absorber of a Lexus Rx 300? Let's see carefully how to do it: loosen the pins of the rim with a special tool (telescopic wrench or compressed air drill), lift the car onto a column bridge and slide out the rim. With a socket wrench we go to unscrew the locking pins of the shock absorber (in the upper and lower part), lower the car with the column bridge and unscrew the pin on the side in the luggage compartment (remove the plastic coating), we remove the shock absorber from its housing. Let's compare the old piece with the new one and get ready for assembly.
Posted on 7 November 2023 by ScegliAuto
Other guides that may interest you |
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |