Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Lexus HS?

Model: Lexus HS Anf10 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Battery

Video tutorial

To replace the battery, follow these steps: open the trunk, lift the cargo floor, and remove the plastic support that holds the spare tire. At this point, there is a plastic cover at the bottom of the cargo area that needs to be lifted, and underneath it, on the right side, is the hybrid battery.

Disconnect the battery terminals and pull it out of the compartment. Then, take the new battery and place it in the compartment.

Finally, reassemble the various components to complete the job.


Updated on 18 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on a Lexus HS
How to Replace the Key Fob Battery on a Lexus HS
Lexus HS (2009-2017 / Anf10) To replace the battery in the Lexus HS key fob, you only need a common tool: a flathead screwdriver that most people have at home or a similar tool. …
What is the Fuse Diagram for the Lexus HS 250h?
What is the Fuse Diagram for the Lexus HS 250h?
Lexus HS (2009-2017 / Anf10) In this video, you can see where the fuse boxes are located in the Lexus HS 250h and what their diagrams are, useful in case you need to check the fu…
How to Locate the Fuse Diagrams and Positions in a Lexus HS
How to Locate the Fuse Diagrams and Positions in a Lexus HS
Lexus HS (2009-2017 / Anf10) This video shows the location of the fuse boxes in a Lexus HS and their corresponding assignment diagrams. The first fuse box is located in the cabin…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos