Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Lexus RX 330 oil warning light

Model: Lexus RX Xu30, MK 2 - Years 2003-2008
Part: Service warning light

If you want to manually reset the engine oil warning light that appears on the panel of your Lexus RX 300 Mk2 (year 2004) just follow these simple instructions. First, get inside the cabin and make sure your car is completely shut down. At this point, locate the two buttons located below the left steering wheel lever and hold down the one on the far right. At the same time turn the key and turn on the instrument panel. Wait a few seconds and as soon as the light disappears on the display, release the button and the procedure is completed successfully.

Posted on 26 August 2022 by ScegliAuto

This video is currently unavailable

Related tutorials

How to reset the service light on the Lexus RX-330
How to reset the service light on the Lexus RX-330
Lexus RX (2003-2008 / Xu30, MK 2) Today we will explain how to reset the service light of the Lexus RX model produced from 2003 to 2008. This operation is very simple and quick but sh…
How to reset the tire pressure light in the Lexus RX350?
How to reset the tire pressure light in the Lexus RX350?
Lexus RX (2016-2022 / Al20, MK 4) In this tutorial we can see how to reset the tire pressure light in the Lexus RX350, an extremely simple and quick operation, to be done only once th…
How to reset the tire pressure light in the Lexus RX 450h?
How to reset the tire pressure light in the Lexus RX 450h?
Lexus RX (2016-2022 / Al20, MK 4) In this tutorial we can see how to reset the tire pressure light in the Lexus RX 450h, an extremely simple and quick operation, to be done only once …

Other guides you may be interested in

How to Remove the Rear Bumper on the Ford Fiesta

The preliminary operation is to detach the rear wheel arch from the bumper to access the screws underneath that secure the bumper (the wheel arch detaches by extracting the two plastic screws with a lever). Now unscrew all the screws around the perimeter of the bumper (you can see them by opening the rear hatch) and now you can detach the plastic from the bodywork by gently pulling it outwards: during this operation, be careful not to break the locking pins. Once you have extracted and replaced the bumper, you can reposition it and secure it by following the same operations done previously.

Watch the video!


by ScegliAuto

More videos