Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure light in the Lexus RX 450h?

Model: Lexus RX MK 4, Al20 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Tire pressure warning light

See other generations:
Video tutorial

In this tutorial we can see how to reset the tire pressure light in the Lexus RX 450h, an extremely simple and quick operation, to be done only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, let's go inside the cabin, then insert the key and turn on the instrument panel.

Next, reach the settings menu using the directional buttons on the steering wheel, enter "Vehicle Settings", place the selector on the "TPMS" option and hold down the "OK" button. At this point, all that's left to do is wait for the calibration to finish and start the vehicle.


Posted on 25 July 2025 by ScegliAuto


Related tutorials

How do you reset the tire pressure light on the Lexus RX?
How do you reset the tire pressure light on the Lexus RX?
Lexus RX (2008-2015 / Al10, MK 3) The tire pressure warning light that appears on the instrument panel of the Lexus RX can be reset by inflating the tires, bringing them to the correc…
What is the Fuse Diagram for the Lexus RX 450h?
What is the Fuse Diagram for the Lexus RX 450h?
Lexus RX (2008-2015 / Al10, MK 3) In this video, you will see where the fuse boxes are located in the Lexus RX 450h and their respective diagrams, which should be consulted if you nee…
How to Reset the Tyre Pressure Light on a Lexus RX?
How to Reset the Tyre Pressure Light on a Lexus RX?
Lexus RX (2008-2015 / Al10, MK 3) To reset the tyre pressure light on a Lexus RX, inflate the tyres to the recommended pressure value, which is indicated on the sticker affixed to the…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos