Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Lexus RX?

Model: Lexus RX MK 3, Al10 - Years 2008-2015
Part: Tire pressure warning light

In order to reset the tire pressure warning light of the Lexus RX, you need to inflate the tires, bringing them back to the recommended pressure value: this value is indicated on the sticker attached to the driver's side door pillar. Once all the tires have been inflated to the correct pressure value, you can press and hold the SET button located under the steering column: after a few seconds of holding down the button, you will notice that the tire pressure warning light has disappeared and you can turn off the ignition.

Posted on 18 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Lexus RX
How to reset the tire pressure warning light on the Lexus RX
Lexus RX (2016-2022 / MK 4, Al20) The following steps will show us how to reset the tire pressure warning on the Lexus RX; before resetting the TPMS sensors, it is necessary that all …
How to reset the tire pressure warning light on the Lexus RX350.
How to reset the tire pressure warning light on the Lexus RX350.
Lexus RX (2022-2026 / Alh10, Ala10) Let's see how to reset the tire pressure warning light on the Lexus RX350: first of all, check the tire pressure with a reliable gauge, then turn on …
How to Reset the Tyre Warning Light on the Lexus RX 350?
How to Reset the Tyre Warning Light on the Lexus RX 350?
Lexus RX (2008-2015 / MK 3, Al10) Resetting the tyre warning light on the Lexus RX 350, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensur…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos