Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning on the Lexus RX

Model: Lexus RX MK 3, Al10 - Years 2008-2015
Part:

Following these brief and simple instructions, we will see how to reset the tire pressure warning of the Lexus RX; before performing the TPMS sensor reset, it is necessary that all four tires are at the correct pressure. Then, get into the car and start the instrument panel; then press and hold the TPMS reset button located at the bottom on the driver's side, above the pedals, until the tire pressure warning reset is completed and appears on the instrument panel. Finally, turn off the instrument panel and start the engine!

Posted on 1 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the tire pressure warning of the Lexus RX.
Resetting the tire pressure warning of the Lexus RX.
Lexus RX (2016-2022 / MK 4, Al20) .. In a few simple steps, we will see how to reset the tire pressure warning on the Lexus RX; before performing the TPMS sensor reset, it is.. …
How to reset the tire pressure warning light on the Lexus RX
How to reset the tire pressure warning light on the Lexus RX
Lexus RX (2016-2022 / MK 4, Al20) .. The following steps will show us how to reset the tire pressure warning on the Lexus RX; before resetting the TPMS sensors, it is necessary.. …
How do you reset the tire pressure warning light on the Lexus RX?
How do you reset the tire pressure warning light on the Lexus RX?
Lexus RX (2008-2015 / MK 3, Al10) In order to reset the tire pressure warning light of the Lexus RX, you need to inflate the tires, bringing them back to the recommended pressure valu…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos