Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Steering Rack Tie Rod End Replacement

Model: Lexus IS MK 2 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Control arm

See other generations:
Video tutorial

The failure of the tie rod end of the steering rack is a fairly common fault as the ball joint is constantly in operation. Lift the vehicle on a ramp and remove the front wheel.

Remove the safety clip from the ball joint pin and undo the securing nut. Use a fork puller to extract the tie rod end and loosen the lock nut on the tie rod to complete the removal of the end, noting the number of turns. Screw on the new tie rod end with the same number of turns, tighten the lock nut and secure it to the hub support.

After installation, it is recommended to have the alignment checked.


Updated on 18 February 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb of the Lexus IS250
How to Replace the Front Headlamp Bulb of the Lexus IS250
Lexus IS (2005-2013 / MK 2) In this new mini guide dedicated to your Lexus IS250 second series (2011), we will discover how to replace the front headlamp bulb independently, wit…
How to Replace the Air Filter on a Lexus IS
How to Replace the Air Filter on a Lexus IS
Lexus IS (2013-2024 / MK 3) If you need to replace the air filter on this model of car, you can find the necessary information and steps to follow in the description below and i…
Replacing the Rear Drop Link
Replacing the Rear Drop Link
Lexus IS (2005-2013 / MK 2) If you hear a noise similar to a knocking sound coming from the rear suspension, it is likely that the drop link connecting the rear stabiliser bar t…

How to Activate the Automatic Folding and Unfolding of the Wing Mirrors on the Jeep Compass

Follow these brief instructions to activate the automatic folding and unfolding of the external wing mirrors on the Jeep Compass. First, get inside the vehicle and turn on the ignition; then press the button located beneath the mirror glass adjustment to electrically open the mirror, as shown in the video. Pressing the button in the opposite direction will close the mirrors; by holding the button, the mirrors will open and close automatically!

Watch the video!


by ScegliAuto

More videos