Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the instrument panel of the Lexus IS

Model: Lexus IS MK 2 - Years 2005-2013
Part: Instrument cluster

Disassembling and replacing the instrument panel of the Lexus IS does not require the use of special tools; let's see how to perform the operation following these simple steps. First of all, we get on board the car and start unscrewing the plastic screws we find under the instrument panel; then we remove the plastic cover that we find around the instrument panel, unscrewing the additional screws of the panel to remove it, as shown in the video. At this point, we disconnect the electrical connectors found on the back, finally removing the instrument panel from the dashboard!

Posted on 25 March 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Lexus IS
Lexus IS (2005-2013 / MK 2) Below we will see the instructions that will allow us to reset the tire pressure warning of the Lexus IS; before performing the TPMS sensor reset, it…
How to reset the tire pressure warning on the Lexus IS
How to reset the tire pressure warning on the Lexus IS
Lexus IS (2005-2013 / MK 2) Today we will see the steps that will allow us to reset the tire pressure warning on the Lexus IS; before performing the TPMS sensor reset, it is nec…
How to reset the tire pressure light in the Lexus IS 250?
How to reset the tire pressure light in the Lexus IS 250?
Lexus IS (2005-2013 / MK 2) In this tutorial we can see how to reset the tire pressure light in the Lexus IS 250, an extremely simple and quick operation, to be done only after …

How to Remove the Fuel Pump from a Hyundai IX35

How to remove the fuel pump from a Hyundai IX35. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; that is what you need to dismantle. Undo the screws of the metal cap and remove it. Wrap the entire perimeter of the metal sheet with absorbent paper or cloth, then, with a screwdriver, undo the large bolt around the pump (if present for the model). Disconnect the power connectors and the liquid circulation pipes. Finally, extract the floating fuel pump. To perform the assembly, work in reverse order.

Watch the video!


by ScegliAuto

More videos