Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Camera on a Lincoln MKX

Model: Lincoln Mkx MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015

See other generations:
Video tutorial

If the rear camera on your Lincoln MKX is faulty, replacing it is not difficult, as the entire operation can be done from the rear trunk. Open the trunk and remove the screws from the internal handles, which secure the plastic parts to the body.

Take off the trim, being careful not to scratch the plastics and the glass. The camera is located exactly in the center of the trunk, and you can see it well because it has its electrical connector.

You can find the camera on major e-commerce platforms for about $62. Be careful during installation to orient the camera in the same position it was in before. If necessary, take a photo for reference.

Now, just reconnect the connector and reassemble the plastics in their place. The job is complete.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

Lincoln Mkx (2016-2018 / MK 2) To replace the battery in a Lincoln MKX, open the hood to access the components in the engine compartment. On the right side, you will find the batte…
Lincoln Mkx (2016-2018 / MK 2) To replace the battery in the Lincoln MKX, open the hood to access the components inside the engine compartment. The battery is located immediately u…
Lincoln Mkx (2016-2018 / MK 2) In this tutorial, you will see how to remove the rear door panel on a Lincoln MKX, a very simple and quick operation. First, go inside the cabin, the…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Service Light on the Mitsubishi Canter

When it is necessary to change the engine oil of the Mitsubishi Canter, a warning on the dashboard alerts us to this requirement. Once this maintenance task is completed, you must reset the control system. Sit in the driver's seat and turn on the instrument panel. Without starting the engine, press and hold the accelerator pedal for twenty seconds. After this time interval, while still holding the accelerator pedal, pump the brake pedal six times. Once done, the warning on the instrument panel will turn off, confirming the reset.

Watch the video!


by ScegliAuto

More videos