Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Lml Star
Part:

To replace the knobs on the LML Star, remove the old ones by prising them off from the base, as there is a screw at the end that may break. Heat the knob along its entire length, using a hairdryer in this case; use a screwdriver to lever at the joint between the knob and the steering, while pulling with the other hand. Repeat this operation for both knobs. Once the old knobs are removed, install the new ones and check their proper functioning.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Grips on the LML Star
Star To replace the grips on the LML Star, heat the grips installed on the handlebars with a hairdryer or another heat source: once they are heated, they …
How to Replace the Shock Absorbers on the LML Star?
How to Replace the Shock Absorbers on the LML Star?
Star To replace the rear wheel shock absorbers on the LML Star, first remove the cover located over the rear wheel. Once removed, unscrew the two 17 mm bo…
How to Replace the Front Brake Disc and Pads of the LML Star?
How to Replace the Front Brake Disc and Pads of the LML Star?
Star To replace the front brake disc and pads of the LML Star, first loosen the nut that secures the front wheel to its forks. Once the nut is loosened, r…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos