Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Mahindra Xylo - Engine oil

Mahindra Xylo (2009-2019 / MK 1)
How to change the oil on a Mahindra Xylo.
If we want to proceed with replacing the motor oil and filter on this car model in a DIY manner, in the writing below, we will find the instructions and …read all…
Posted on 22 April 2023 by ScegliAuto
Mahindra Xylo (2009-2019 / MK 1)
How to change the engine oil in the Mahindra Xylo?
The video shows us how to change the engine oil in the Mahindra Xylo. The first thing to do is to eliminate the old oil by placing a large container under the …read all…
Posted on 4 September 2022 by ScegliAuto
Key (3) Checks and maintenance (1) Air filter (1) Cabin air filter (2) Diesel filter (3) Oil filter (1) Accessory Kit (1) Headlight bulb (1) Brake oil (1) Engine oil (2) Front bumper (1) Brake pads (1) Wheel (2) Suspensions (1) Windshield washer nozzle (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos