Do it yourself
Frequently asked questions about cars and motorcycles

Mahindra Xylo - Wheel

Mahindra Xylo (2009-2019 / MK 1)
How to install the plastic wheel covers on the Mahindra Xylo

In this video we show you how to install the plastic wheel covers on the Mahindra Xylo. If you want to replace the wheel covers of your Mahindra Xylo with a …read all…
Posted on 28 September 2022 by ScegliAuto
Mahindra Xylo (2009-2019 / MK 1)
Replacement of the wheel with the spare wheel of the Mahindra Xylo

We see in this guide the main instructions that will allow us to disassemble and replace the wheel with the spare one of the Mahindra Xylo. First we open the …read all…
Posted on 23 September 2022 by ScegliAuto

Key (3) Checks and maintenance (1) Air filter (1) Cabin air filter (2) Diesel filter (3) Oil filter (1) Accessory Kit (1) Headlight bulb (1) Brake oil (1) Engine oil (2) Front bumper (1) Brake pads (1) Wheel (2) Suspensions (1) Windshield washer nozzle (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos