Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Mahindra Xylo - Key

Mahindra Xylo (2009-2019 / MK 1)
How to fix a Mahindra Xylo key controls
If our car key is rather dated and is worn especially on the buttons, we can buy a kit online after market containing the new controls and proceed with their …read all…
Posted on 15 April 2023 by ScegliAuto
Mahindra Xylo (2009-2019 / MK 1)
How to replace the buttons on the Mahindra Xylo key?
With a small screwdriver with a suitable tip for this purpose, we go to unscrew the screw located at the bottom, near the key blade, and the one on the …read all…
Posted on 10 May 2024 by ScegliAuto
Mahindra Xylo (2009-2019 / MK 1)
How to replace and repair Mahindra Xylo remote key
If we have damaged the cover of our car remote control key, it is possible to replace the cover itself by following the instructions below: use a very small …read all…
Posted on 7 May 2024 by ScegliAuto
Key (3) Checks and maintenance (1) Air filter (1) Cabin air filter (2) Diesel filter (3) Oil filter (1) Accessory Kit (1) Headlight bulb (1) Brake oil (1) Engine oil (2) Front bumper (1) Brake pads (1) Wheel (2) Suspensions (1) Windshield washer nozzle (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos