Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace and Repair the Remote Key for the Mahindra Xylo

Model: Mahindra Xylo MK 1 - Years 2009-2019
Part: Key

If you have damaged the cover of your vehicle's remote key, you can replace the cover by following these instructions: Get a very small screwdriver and remove the small screw located on the back of the key. Use a utility knife to pry along the seam to open the key. Then, remove the electronic board, which also includes the battery. If you have another key available, you can install the electronic board into the other cover. After that, reassemble the cover and secure it again with the screw.

Updated on 19 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Suspension on a Mahindra Xylo
How to Replace the Rear Suspension on a Mahindra Xylo
Mahindra Xylo (2009-2019 / MK 1) This guide provides the main instructions to remove and replace the rear suspension on a Mahindra Xylo. First, lift the vehicle with a jack and begin…
Troubleshooting Brake Booster Damage on Mahindra Xylo
Troubleshooting Brake Booster Damage on Mahindra Xylo
Mahindra Xylo (2009-2019 / MK 1) As shown in the video, we explain how to repair damage to the brake booster of the Mahindra Xylo. A damaged brake pedal will make a hissing sound, in…
Replacing the Wheel with the Spare on the Mahindra Xylo
Replacing the Wheel with the Spare on the Mahindra Xylo
Mahindra Xylo (2009-2019 / MK 1) This guide provides the main instructions for removing and replacing the wheel with the spare on the Mahindra Xylo. First, open the trunk and lift th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos